Radwell International’s Blog

PCB stands for Printed Circuit Board.

A printed circuit board mechanically supports and electrically connects electronic components or electrical components using conductive tracks, pads and other features etched from one or more sheet layers of copper laminated onto and/or between sheet layers of a non-conductive substrate. Components are generally soldered onto the PCB to both electrically connect and mechanically fasten them to it.

Printed circuit boards (PCBs) are thin boards made from an insulating material, with a metal coated surface. Etches are made in the metal with acid to create pathways for electricity to travel among various components which are surface mounted on the board with solder. 

Sometimes one phone call can make all the difference. This  story begins because of a service call placed on October 10^th, 2017 by Siemens Healthcare in Plainfield, Indiana to the team at Radwell International in Franklin, Indiana. 

Siemens contacted Radwell for a service call because they had parts that could not be repaired by their regular vendor. Matthew Hartwell and Eric Dupont of Radwell International's Indiana location went to that service call and Eric worked on the part for about 30 minutes and was able to repair it.  Eric then worked on the second part  with the same impressive results.  Siemens people checked and verified everything was working as they wanted, and they were amazed that Eric had diagnosed and repaired everything in such a short amount of time. Even the techs on site were blown away that Eric was able to get it working again.

There are many important things to consider when choosing an electronics repair company to work with. The right repair company for your business can ensure that your repair process is efficient and seamless. Keeping your business up and running can be a matter of choosing the right company to handle your repairs.  There’s a few key points to consider when deciding which company to choose as your repair provider.